Chrome Plated Rod
Hollow Piston Rod
Chrome plated shaft
Hydraulic Cylinder Rod
ST52 Honed Tube
Could Drawn Honed Tube
AISI1020 Honed Tube
Small Diameter Honed Tube
High Precision Honed Tube
Electric pressure washing
Gasoline & diesel pressure washing
C20 Honed Tube
Q+T Honed Tube
SRB Tube
Hydraulic cylinder
Our Company
Our Factory
Hydro Service
FAQ
Factory News
AISI4140 Q+T Induction Hardened Chrome Plated Piston Rod
| Categories | Chrome Plated Piston Rod |
|---|---|
| Brand | HYDRO Precision Steel Pipe Manufacturer |
| FOB port | Shanghai |
| Terms of Payment | L/C, T/T |
| Update Time | Nov 21,2024 |
Detail Information
AISI4140 Q+T Induction Hardened Chrome Plated Rod
| Material: | CK45/ ST52/ 20MnV6/ 42CrMo4/ 40Cr/ bearing steel/ stainless steel |
| Tolerance | ISO f7 |
| Chrome thickness: | 20~50micron |
| Hardness of the chrome layer: | 800HV(min) |
| Roughness: | Ra 0.2micron (max) |
| Straightness: | 0.1/1000mm |
| Yield Strength | ≥350 Mpa |
| Tensile Strength | ≥580 Mpa |
| Elongation | ≥ 15% |
| Supply condition: | 1.Hard chrome plated |
| 2.Induction hardened | |
| 3.Quenched & Tempered | |
| 4.Induction hardened with Q&T |
Chemical Composition
| Material | C% | Mn% | Si% | S% | P% | V% | Cr% |
| Ck45 | 0.42-0.50 | 0.50-0.80 | 0.17-0.37 | ≤0.035 | ≤0.035 | ≤0.25 | |
| ST52 | ≤0.22 | ≤1.6 | ≤0.55 | ≤0.04 | ≤0.04 | 0.02-0.15 | |
| 20MnV6 | 0.17-0.24 | 1.30-1.70 | 0.10-0.50 | ≤0.035 | ≤0.035 | 0.10-0.20 | ≤0.30 |
| 42CrMo4 | 0.38-0.45 | 0.50-0.80 | 0.17-0.37 | ≤0.035 | ≤0.035 | 0.07-0.12 | 0.90-1.20 |
| 40Cr | 0.37-0.45 | 0.50-0.80 | 0.17-0.37 | ≤0.035 | ≤0.035 | 0.80-1.10 |
Mechancial Properties
| Material | T.S N/MM2 | Y.S N/MM2 | E%(MIN) | CHARPY | CONDITION |
| CK45 | 610 | 355 | 15 | >41J | NORMALIZE |
| CK45 | 800 | 630 | 20 | >41J | Q + T |
| ST52 | 500 | 355 | 22 | NORMALIZE | |
| 20MnV6 | 750 | 590 | 12 | >40J | NORMALIZE |
| 42CrMo4 | 980 | 850 | 14 | >47J | Q + T |
| 40Cr | 1000 | 800 | 10 | Q + T |
Corrosion Resistance:
Min 120 hours NSS Rating 9 test according to ISO 9227 and ISO 10289 for the evaluation of the results.
| Induction Hardeness | 50-55HRC |
| Induction Layer | 1.7-2.5mm |
Please send your message to us
- Tel
- *Title
- *Content
- Service for Hydraulic Cylinder Parts
Please send your message to us
- Tel
- *Title
- *Content
